EasyManua.ls Logo

Motomaster Eliminator PowerBox 011-2012-4 - General Safety Warnings

Motomaster Eliminator PowerBox 011-2012-4
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
L
Lt
WARNING: Shock Hazard.
KEHlp
away from children!
The Motomaster® Eliminator Power Pack generates the same potentially lethal AC power
as a normal household wall outlet Do not insert foreign objects into the AC outlet, the DC
Power Pack Socke the Jumpstart Gable Port or the ventilation hole. Do not expose this
product to water, rain, sno ,condensation or spray.
Do not open the Motomaster® Eliminator Power Pack and attempt to replace the internal
battery. Have a qualified technician perform any service work.
Lt
WARNING: Explosion Hazard
Do not use this product where there are flammable fumes or gases, such as in the bilge of a
gasoline-powered boat or near propane tanks. Do not use this product in an enclosure
containing automotive-type lead-acid batteries. These batteries, unlike the sealed AGM
battery in the Motomaster® Eliminator Power Pack,
vent
explosive hydrogen gas which can
be ignited by sparks from electrical connections.
When working on electrical equipment, always ensure someone is nearby to aid you in case
of an emergency.
Lt
WARNING: Heated Surface
Ensure at least 3" (7.5 cm) of air space is maintained on all sides of the Motomaster®
Eliminator Power Pack. During operation, keep away from materials that can be affected by
high temperatures such as blankets, pillows and sleeping bags.
Lt
WARNING: Fire Hazard
Never
allow the boosting cable's red and black clamps to touch each other or another
common metal conductor. This could cause damage to the unit and/or create a
sparking/explosion hazard. Always store boosting clamps in the appropriate holder on each
side of the Motomaster® Eliminator Power Pack after each use.
Lt
WARNING: Fire Hazard
The boosting cable clamps must be connected positive to positive (red clip to battery
"+")
and
negative
to
negative
(black clip to battery "-" or engine ground). A
reverse
polarity
connection (positive to
negative)
may cause damage to the unit and/or create a
sparking/explosion hazard.
3.