© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A. Phone: 248.313.0272 ▪ Fax: 248. 313.0271
8MANULDNSINS003 03-21-18 www.motorcitywashworks.com 1
SINGLE AND THREE BRUSHES DRY-N-SHINE Rev 3
INSTALLATION MANUAL
TABLE OF CONTENTS
Equipment Specifications Page: 1
Equipment Features Page: 1
Suggested Tools and Installation Materials Page: 2
Installation Instructions Page: 3
Electrical Installations Page: 17
Pneumatic Installations Page: 28
Plumbing Installations Page: 29
Operations and Startup Page: 30
Maintenance Page: 45
Equipment Requirements
Notes and safety Symbols
Where necessary, important points will be highlighted in this manual, using the following symbols:
NOTE: PROVIDES FURTHER INFORMATION!
WARNING! DANGEROUS SITUATION WHICH MAY CAUSE
EQUIPMENT DAMAGE, PERSONAL INJURIES OR FATALITIES!
Always follow all notes, warnings, and instructions. Failure to do so may have serious consequences on
the overall performance of the equipment and/or the safety of the people working on the equipment!
TOP WHEEL ONLY TOP WHEEL AND SIDE WHEELS
ELECTRICAL
POWER:
208V SYSTEM: ONE 40 AMPS 3PH CIRCUIT
480V SYSTEM: ONE 20 AMPS 3PH CIRCUIT
CONTROL:
1 TOP WHL READY SIGNAL CW CONTROLLER
1 E-STOP OK SIGNAL CW CONTROLLER
POWER:
208V SYSTEM: ONE 40 AMPS 3PH CIRCUIT
480V SYSTEM: ONE 20 AMPS 3PH CIRCUIT
CONTROL:
1 TOP WHL READY SIGNAL CW CONTROLLER
1 SIDE WHLS READY SIGNAL CW CONTROLLER
STOP OK SIGNAL CW CONTROLLER
PNEUMATICS 3 SCFM 3 SCFM
WATER 10 GPM @ 40 PSI 10 GPM @ 40 PSI
STOP! PRECAUTION TO TAKE TO AVOID EQUIPMENT
MALFUNCTION OR ERROR!
To Next Page
Need help?
General