Peripheral Expansion Connectors
MOTOROLA Technical Summary 2-21
2.14 Peripheral Expansion Connectors
The EVM board contains a group of Peripheral Expansion Connectors used to gain access
to the resources of the 56F8323. The following signal groups have expansion connectors:
• PWM Port A
• Serial Peripheral Interface Port #0
• Serial Peripheral Interface Port #1
• Serial Communications Port 0
• Serial Communications Port 1
• Encoder #0 / Timer Channel A
• Timer Channel C
• FlexCAN Port
• A/D Input Port A
•GPIO Port A
•GPIO Port B
•GPIO Port C
• IRQA / RESET / CLOCK
2.14.1 PWM Port A Expansion Connector
The PWM port A is attached to this connector. Refer to Table 2-14 for connection
information.
Table 2-14. PWM Port A Connector Description
J5
Pin # Signal Pin # Signal
1 PWMA0 / PA0 2 PWMA1 / PA1
3 PWMA2 / PA2 / SS1
4 PWMA3 / PA3 / MISO1
5 PWMA4 / PA4 / MOSI1 6 PWMA5 / PA5 / SCLK1
7 FAULTA0 / PA6 8 FAULTA1 / PA7
9 FAULTA2 / PA8 10 NC
11 ISA0 / PA9 12 ISA1 / PA10
13 ISA2/PA11 14 GND
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...
To Next Page
Loading...
