Motorola 900 series - MVME338 Terminal I;0 Subsystem Controller

VME Expansion Module
MVME338 Terminal 110 Subsystem Controller
3-20
The MVME338 terminal I/0 subsystem controller is a terminal server used to
connect a variety of EIA-232-D devices
and parallel printers to the system.
If you have an MVME338 and MVME339 installed in your
system, you need to make sure that the addresses of those
boards are unique. If the addresses are the same, your
system will panic during boot up.
Table 3-9. MVME338 (20 MH:z) Jumper Settings
Header Setting
El
9-10
E2
7-8
E3,E4,E5
2-3
E6
1-2,3-4
E7,E8,E9
No Jumper
E10
1-2
Ell
3-4
E12 2-3
E13, E14, E17, E18
1-2
E15, E16, E19
No Jumper
E20
(See Figure)
E21
No Jumper
E22 3-4,7-8,13-14
E23
-E27 (See Figure)
E28,E29,E31
No Jumper
E30 1-2
E32 1-2,3-4, S-6,
7-8,9-10, 11-12, 13-14, 15-16
E33
1-2
Reference Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com