Using Calling Features 119
Bar Incoming Calls
This feature allows you to place calls, but refuses
incoming calls. Callers hear a recording telling
them that you are unavailable. To be sure not to
miss a call, see “Using Detailed Call Forwarding”
on page 112.
Satellite Mode
Cellular Mode
(GSM 900/1800)
(GSM 900)
To bar incoming calls in satellite mode or GSM
cellular mode:
1. Follow the steps in “Getting to Call
Barring...” to get to
Bar Incoming Calls, and
then press
O to select.
2. Press
M to scroll to When Roaming, All Calls,
or
Off, and then press O to select. You will
see
Enter Password.
3. Enter your bar password, and then
press
O. You will see Completed.
4. Press and hold
C to exit the menu.
Note: The
Bar Incoming Calls/When Roaming feature
does not apply in satellite mode. However, you can
cancel the
Bar Incoming Calls/When Roaming feature in
satellite mode if the feature was previously
activated in GSM cellular mode.
Cellular Mode
(TDMA 800/1900)
(CDMA 1900)
(CDMA/AMPS)
This feature is not available in TDMA or CDMA
cellular mode.
To Next Page
Loading...