64 Using In-Call Features
You may see one of the following messages:
hold a private
conversation with
one of the
conference call
participants
1. Press M until you see Split
Call
, and then press O to
select. You will see the name of
the first party added to the
conference call.
2. Press M to scroll through the
list of call participants until you
find the party you want to talk
to, then press O to select.
The selected party becomes the
active call, with the other parties
placed on hold.
To return the private call to the
conference call, repeat the steps
for making a conference call as
described on page 63.
end conference
call
Press C at any time.
Message Description
Conference
Unsuccessful
One of your calls is already
engaged in a conference call
controlled by a remote party
or
The attempt to join the held call
and the active call was
unsuccessful.
Conference Full
You already have the maximum
number of five callers joined in a
conference call.
Split Call
Unsuccessful
You already have an active call and
a call on hold
or
The attempt to split the call was
unsuccessful
If you want to... Then...
To Next Page
Loading...