42 - Calling Features
Note: Emergency numbers vary by country. Your handset’s
preprogrammed emergency number(s) may not work in all
locations, and sometimes an emergency call cannot be placed due
to network, environmental, or interference issues.
Sending Tones
While you are on a call, you can enter information such as credit
card numbers, passwords, and extensions by sending tones.
Answering Calls
When you receive an incoming voice or video call, the handset
rings or vibrates (unless set to Silent mode).
If you answer a new voice call while another voice call is active, the
new call becomes active and the previous call is put on hold.
If you receive a new voice call while one call is active and another
call is on hold, the screen displays the following buttons:
• Busy: Tap to send the incoming call to voicemail.
• Answer: Tap to answer the incoming call; the current active call
will be placed on hold.
Do This
1 In the call screen, tap keypad.
2 Tap the characters you want to send on the keypad.
The characters are sent as tones to the network.
Do This
Press
B
or tap Answer to answer the call.
If you do not want to accept the call, press
A
or tap
Ignore to reject it.
To Next Page
Loading...
