Changing Your MG7540’s Username and Password,
and Resetting to Factory Defaults
Changing Your MG7540’s Username and Password
To change your MG7540’S Username and Password, first log into the
Configuration Manager as described in chapter 6. In summary, you type
192.168.0.1 in the address bar of your browser, go to that address, enter the
Username admin and Password motorola, then click the Login button.
This will bring you to the Basic Status and Settings page. Select Advanced at the
top of the screen, and then Status and Security.
You will need to enter the Current Username and Password, and then the new
Username and Password. Your new Password will have to be entered twice. Both
the Username and Password fields accept entries up to 15 characters long. Both
Username and Password may include lower- and upper-case letters (a – z, A – Z)
and numbers (0 – 9). Special characters are not allowed. Be sure to click Save to
write your changes to memory.
To Next Page
Loading...
