Motorola ACE3600 RTU - Page 18

Description
1-8
Component Function Notes
I/O expansion module Connects the I/O modules on
an I/O expansion frame to the
CPU module on the RTU’s
main frame (frame 0),
directly or via an expansion
LAN switch).
See Expansion Module
chapter.
I/O expansion power supply Connects 12V power and
12V DO from the power
supply on the RTU’s main
frame to an I/O expansion
frame, or from one I/O
expansion frame to another.
See Expansion Power
Supply Module chapter.
I/O expansion LAN switch One switch enables
connection of up to seven
expansion frames to the main
frame CPU.
Two switches allow
connection of up to thirteen
expansion frames to the main
frame CPU.
See Expansion LAN Switch
chapter.
ACE IP Gateway module Serves as a front end unit
between
ACE3600/MOSCAD RTUs
and control center SCADA
clients using TCP/IP
protocol.
See ACE IP Gateway
Module chapter.
TB holder kit Holds Module TBs. See I/O Modules chapter.
Cable with TB holder A cable to connect signals to
the I/O modules.
See I/O Modules chapter.
Backup battery Enables backup RTU
operation when main power
fails.
See Power Supply Module
and Backup Battery
chapter.
Radio installation kit Mechanical support and
cables that enable installation
of radio.
See Radio Types and
Installation Kits chapter.
RS485 Connection Box Enables connection of up to 6
devices to the RS485 port on
the CPU (2W multi-drop).
See the RS485 Connection
Box chapter.