Motorola ACE3600 RTU - Replacing a Power Supply Module

Break/Fix Procedures
Press Down on
Module Release Tab
Press Up on Module
Release Tab
Figure 29-1 ACE3600 Module Release Tabs
4. Remove any SRAM plug-in memory from the old CPU module and plug in to the new
CPU module.
5. Slide the new module all the way into the slot until the tabs click into place.
6. Reconnect the cables and press the cable holder back up into place.
Replacing a Power Supply Module
METAL PARTS OF THE POWER SUPPLY MAY BE VERY HOT.
After removing the power supply module, allow the metal parts to cool down before
servicing the unit.
29-2