Option Actions
f Press Optn.
g Select Send and press Sel.
h Perform one of the following options:
• Select the required address. The message is sent.
• Select [Other Recpnt] and press Edit. Enter the ad-
dress entry and press Send.
Sending Sent Text Messag-
es
a View the Sent Text Message.
b Press Optn→Send.
c Perform one of the following options:
• Select the required address.
• Select [Other Recpnt] and press Edit. Enter the ad-
dress entry.
d Press Send.
NOTE: You can append a priority status and a request reply to your message.
If the message is successfully sent, your radio shows the following indications:
• A tone sounds.
• The display shows a positive notification.
27.4
Priority Status and Request Reply for New Text Messages
Before sending your message, you can add a priority status, request reply, or both to your message.
27.4.1
Appending Priority Status and Request Reply to Text Messages
Prerequisites: Ensure that you compose an outgoing message before performing this procedure.
Procedure:
1 Press the Optn menu item.
2 Depending on your requirement, use one of the following options:
• To append priority status to text messages, press Impt.
• To append request reply to text messages, press RqRp.
• To append priority status and request reply to text messages, press Impt→RqRp.
The Priority Status and Request Reply icons appear accordingly beside the normal message icon on
the label bar.
NOTE: The Priority Status icon on a message does not imply that the message gets higher
priority than other messages when being transmitted. This icon is embedded into a message to
notify the recipient that the message is important.
68012006035-FA
Chapter 27 : Text Messaging Service
105
To Next Page
Loading...
