Function Description
Direct Yelp Allows you to directly activate and deactivate a Siren broadcast
that plays a Yelp Siren tone.
Digital Vehicular Repeater
System (DVRS)
Allows you to switch between the DVRS modes.
DTMF Tone Sends out DTMF code of the assigned DTMF value
Dynamic ID (Conventional On-
ly)
Allows you to edit the ASTRO Individual ID or MDC Primary ID of
the radio.
Dynamic Priority (Convention-
al Only)
Allows you to select the Dynamic Priority scan assignment.
Emergency Allows you to enter and also exit Emergency Mode Operation.
Emergency Supervisor Clear This button-press is selected for Side Middle Button or Accy
1-dot. Emergency Exit Control is set to Supervisor.
External Radio Allows you to activate and deactivate External Radio Mode with a
Siren button-press.
Front/Rear Allows you to switch the focus of the radio between Control
Heads, thus allowing one of two control heads to be active at
one time.
Gunlock (1, 2, 3, or All) These four separately programmed button-presses, Gunlock 1,
Gunlock 2, Gunlock 3 and Gunlock All, allow you to unlock Gun-
lock 1, 2, or 3, or all Gunlocks simultaneously.
Hi/Lo Allows you to select the Hi/Lo Siren tones.
Horn Lights Allows you to turn the horn and lights external alarms on or off.
In Car Monitor Allows you to toggle between the two In Car Monitor (ICM)
modes, which are ICM All or ICM Selected.
Information (Info) Allows you to retrieve and view basic radio information such as
IP-related information, buttons or switches control mapping, and
view or modify the Soft ID.
Intercom Allows you to access the Intercom feature.
Internet Protocol Address (IP) Allows you to retrieve and view on the radio display the current
IP Address, device name, and status of the radio.
Location Allows you to determine the current location (latitude, longitude,
time, and date) and also the distance and bearing to another
location.
Manual Allows you to activate and deactivate the RM-defined Manual
Tone of the Siren option.
Message Allows you to select from the Message Alias List of the current
channel or mode.
Modem On and Off Allows you to activate and deactivate Modem capability.
Mode Select (MS01–MS13) To change to the preset Mode Select zone and channel, press
the button.
When the Preconfigurable Preset Zone and Channel field is
enabled, to save the current zone and channel to one of the
68012006035-FA
Chapter 3 : Radio Overview
27
To Next Page
Loading...
