Motorola APX 6000XE MODEL 2 - Page 122

depending on your preference and the programmed
functions.
•
Turn Bluetooth visibility on via radio menu BT:
a)
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth
feature screen.
b)
or to Visibility and press the Menu
Select button directly below On.
The status changes to Visible to all.
Visibility mode is enabled.
When the timer expires, the status changes to
Visibility failed. Repeat the procedure to
turn Bluetooth visibility on.
• Turn Bluetooth visibility on via the preprogrammed
button.
a) Press the preprogrammed button to enable the
Bluetooth visibility feature.
You hear a short, medium-pitched tone. The
display shows momentary Visible to all.
Visibility mode is enabled.
When the timer expires, the display shows
momentary Visibility failed. Repeat the
procedure to turn Bluetooth visibility on.
Note: Press the preprogrammed to toggle the
Bluetooth visibility on or off.
Receiving Pairing Request from other Devices
When your radio receives a pairing request from
other device, the display shows <Device Friendly
Name>pair request.
Press the Menu Select button below Ok to accept
or Cncl to refuse pairing request.
Turning Bluetooth Visibility Off
Ensure that Bluetooth Visibility is turned on.
The following methods are options on how to turn
Bluetooth visibility off. The result of all the methods is
the same. You can use the options interchangeably
depending on your preference and the programmed
functions.
•
Turn Bluetooth visibility off via radio menu BT:
a)
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth
feature screen.
b)
or to Visibility and press the Menu
Select button directly below Off.
Advanced Features
118
English