APX 6500 O5 CH
48
NEXT > < PREV CONTENTS
ADVANCED FEATURES
Procedure:
You hear a voice announcement when the features below are
preprogrammed in the radio.
• The radio powers up.
The radio announces the current zone and channel it is
transmitting.
• Press the preprogrammed voice announcement button
(which specifically programmed to playback the current
zone and channel).
The radio announces the current zone and channel it is
transmitting.
Note: Pressing this preprogrammed playback button will
always enable the voice feature to announce in High
priority.
• Change to a new zone.
The radio announces the current zone and channel it is
transmitting.
• Change to a new channel remaining within the current
zone.
The radio announces the current channel.
• Press either the Menu Select button or preprogrammed
button of the radio to launch or terminate Scan, PL
Disabled, Talkaround/Direct or Transmit Inhibit.
The radio announces the corresponding feature activation
or deactivation.
To Next Page
Loading...
