6878215A01
2-42 Standard Configurations: RFID (Option)
Figure 2-57. Example of Reader and Tag Misaligned (Reader Orientation)
2.7.2 Programming RFID (If Equipped)
The user can reprogram the tag (up to 12 ASCII characters when encoded to hexadecimal format)
using any UHF Gen 2 capable RFID writer (e.g. Motorola’s MC9090-G).
NOTE: Follow read direction in Section 2.7.1 to optimized reprogramming.
Table 2-8. Model Number Chart in 12-Digit ASCII Format
Model Number Radio Tier/Band/Output Level Last Two Digits
M30KSS9PW1AN APX 7500 SB-MP VHF D2
M30KTS9PW1AN APX 7500 SB-HP VHF D3
M30QSS9PW1AN APX 7500 SB-MP UHF1 E2
M30QTS9PW1AN APX 7500 SB-HP UHF1 E3
M30SSS9PW1AN APX 7500 SB-MP UHF2 D2
M20TSS9PW1AN APX 7500 DB-MP 7/800-MP VHF R2
M30TXS9PW1AN APX 7500 DB-MP 7/800-HP VHF R3
M30URS0PW1AN APX 7500 SB-MP 7/800 F2
Table 2-9. Serial Number with Radio Band/Tier/Power
Characters Radio Band/Tier/Power
F 7/800
DVHF
E UHF
R 7/800 and VHF
T VHF and UHF
E UHF1 and UHF2
S 7/800 and UHF
2 APX 7500 Mid Power
3 APX 7500 High Power