68009482001 September 9, 2011
Installation: Programming the Consolette 3-17
3.7.2.7 File maintenance on the PC
From the Main Menu page there are links to save the codeplug as a file on the PC; to clone a
codeplug file from the PC into a Consolette; to restore a Consolette from a saved codeplug file; or to
load a codeplug file into the browser for viewing.
NOTE: "Restoring" includes unit-specific fields such as the IP address. "Cloning" does not include the
unit-specific fields. See the help screens for more detail.
NOTE: If the codeplug gets corrupted, or a firmware upgrade changes the codeplug format, the
Consolette may automatically revert to a default codeplug. It is good practice to save a copy
of the codeplug to file, so it can be reloaded if necessary.
3.7.3 Consolette Setup
This section refers to the user editable fields presented by the Consolette to the user’s browser. Note
that the exact appearance will depend on the selected parameters. The web pages are shown here
with their default parameter settings selected for reference.
NOTE: Follow the “For more information on these parameters” link at the bottom of each page for the
most detailed information regarding the fields.
Figure 3-8. Parameter Default Page/Values
To Next Page
Loading...
