Programming Applications 35
5.1.3.1.2 Connection by Ethernet
The Consolette may be configured remotely over a LAN. The Consolette supports a standard 10/
100 Ethernet network interface. Connect the Consolette to the network using a CAT-5 cable from
the LAN port on the rear panel of the Consolette.
NOTE: The Consolette default address is the non-routable address 169.254.132.2. The address
must be configured appropriately for use on a LAN. The Consolette LAN port supports
automatic cable detection and crossover. For initial configuration a computer may be
directly connected to the Consolette LAN port with a CAT-5 cable.
To Next Page
Loading...
