Internet Protocol Address
Display the Internet Protocol (IP) address, device name,
and status of the radio.
Man Down Clear
Clears the Man Down mode alarm that is triggered
when your radio achieves or passes a tilt angle
threshold or a combination of the angle threshold and a
motion sensitivity level.
Monitor (Conventional Only)
Monitors a selected channel for all radio traffic until
function is disabled.
Nuisance Delete
Temporarily removes an unwanted channel, except for
priority channels or the designated transmit channel
from the scan list.
One Touch 1–4
Launches a specific feature with one single button-
press. You can setup as many as four separately
programmed buttons for four different features.
Private Line Defeat (Conventional Only)
Overrides any coded squelch (DPL or PL) that is
preprogrammed to a channel.
Rekey Request
Notifies the dispatcher that a new encryption key is
needed.
Repeater Access Button (RAB) (Conventional Only)
Allows user to manually send a repeater access
codeword.
Reprogram Request (Trunking Only)
Notifies the dispatcher that a new dynamic regrouping
assignment is needed.
Request-To-Talk (Conventional Only)
Notifies the dispatcher you want to send a voice call.
Scan
Toggles scan on or off.
Scan List Programming
Selects the scan list for editing (by long press on the
Scan button).
Secure Transmission Select (Conventional and
Trunking)
Toggles the Secure Transmission On or Off when the
Secure/Clear Strapping fields is set to Select for the
current channel and when the radio is model/option
capable.
English
32
To Next Page
Loading...
