NEXT > < PREV CONTENTS
GETTING STARTED
(continued)
37
• Intercom – Enables users of multiple control
heads to talk to each other via the control heads
in a multi-control head setup.
• Internet Protocol Address – Displays the
Internet Protocol (IP) address, device name and
status of the radio.
• Location – Displays the current location (latitude,
longitude, time and date), and also the distance
and bearing to another location, or toggles
GPS/Location between on and off.
• Message – Allows you to access the message
list.
• Monitor (Conventional Only) – Monitors a
selected channel for all radio traffic until function
is disabled.
• Multiple Private Line (Conventional Only) –
Allows access to Multiple Private Line lists.
• Nuisance Delete – Temporarily removes an
unwanted channel, except for priority channels or
the designated transmit channel from the scan
list.
• Phone Call – Allows you to make and receive
calls similar to standard phone calls.
• Private Call (Trunking Only) – Allows a call from
one individual radio to another.
• Priority Dispatch – Allows you to call the
dispatcher on a different talkgroup.
• Radio Profiles – Allows you to access a set of
preprogrammed visual and audio settings of the
radio.
• Recent Calls – Allows you to view the recent call
history of your radio.
• Rekey Request – Notifies the dispatcher that a
new encryption key is needed.
• Repeater Access Button (RAB) (Conventional
Only) – Allows you to manually send a repeater
access codeword.
• Reprogram Request (Trunking Only) – Notifies
the dispatcher that a new dynamic regrouping
assignment is needed.
To Next Page
Loading...
