Motorola APX 900 - Changing the Current Site; Mission Critical Wireless Bluetooth Bluetooth Wireless Technology; PIN Authentication in Pairing; Pairing the Authentication PIN When Receiving a Pairing Request

• Press the preprogrammed Site Displ/Srch button.
• or to RSSI and press the Menu Select button directly below RSSI.
2 Press the programmed Site Displ/Srch button.
The display shows momentarily the name of the current site and its corresponding received RSSI.
7.21.8
Changing the Current Site
Procedure:
Perform one of the following actions:
• Press and hold down the preprogrammed Site Displ/Srch button.
• Press and hold down the Menu Select button directly below RSSI.
You hear a tone and the display shows momentary Scanning site.
When the radio finds a new site, it returns to the Home screen.
7.22
Mission Critical Wireless Bluetooth
®
Bluetooth
®
Wireless
Technology
This feature allows your radio to extend its functionality by connecting to external accessories.
Use Motorola Solutions proprietary Mission Critical Wireless (MCW) devices with APX radios during
Mission Critical operations. Other Bluetooth devices may or may not meet the mission critical standard.
Your radio supports the following Bluetooth enabled devices or profiles:
• Headset (HSP)
• Dial Up Networking (DUN)
• Personal Area Networking (PAN)
• Serial Port (SPP)
• General Attribute Profile (GATT)
7.22.1
PIN Authentication in Pairing
This feature allows your radio to verify the correct device to pair with using PIN authentication.
NOTE: The PIN authentication method is only applicable for Bluetooth version 2.1 and above.
7.22.1.1
Pairing the Authentication PIN when Receiving a Pairing Request
Procedure:
1 When the radio display shows <Device Friendly Name> pair request, perform one of
the following actions:
• To accept, press the Menu Select button below Ok.
• To reject, press the Menu Select button below Cncl.
Your radio only supports HSP, DUN, PAN, and SPP Bluetooth profiles.
MN003441A01-AP
Chapter 7 : Advanced Features
104