Motorola APX 900 - Removing a Priority Status and a Reply Request from a Text Message; Receiving a Text Message; Viewing a Text Message from the Inbox

7.14.4.6
Removing a Priority Status and a Reply Request from a Text Message
Prerequisites: Ensure that an outgoing message is composed to allow you to perform this procedure.
See Composing and Sending a New Text Message on page 77 for more information.
Procedure:
1 Press the Menu Select button directly below Optn .
2 or to Mark Important and press the Menu Select button directly below Sel to
remove the priority status icon.
3
or to No Req Reply and press the Menu Select button directly below Sel to remove
the reply status icon.
The display shows the normal message icon on the label bar.
7.14.4.7
Receiving a Text Message
When and where to use:
NOTE: When you receive a message that is flagged with the Request Reply icon, you must
manually respond to the sender that you have received the message. The system does not
automatically send a notification to acknowledge that the message was received.
Procedure:
Do one of the following to receive a text message. You can use the options interchangeably
depending on your preference and the programmed functions.
• Receiving a text message using the Data Feature button or the TMS Feature button:
When you receive a message, press and hold the preprogrammed Data Feature button or
the TMS Feature button to access the Inbox.
• Receiving a text message using the radio menu:
When the new message icon appears and the display shows momentary New msg, press the
Menu Select button directly below TMS to access the Inbox.
The display shows a list of aliases or IDs, with the sender of the latest received message on top.
7.14.4.8
Viewing a Text Message from the Inbox
When and where to use: The Inbox can hold up to 30 messages.
NOTE: or to read the message if the content fills more than one screen.
Procedure:
1 Perform one of the following actions:
• Press the preprogrammed TMS Feature button to access the TMS feature screen. or
to Inbox and press the Menu Select button below Sel .
• Press and hold the preprogrammed TMS Feature button to access the Inbox.
• or to TMS and press the Menu Select button directly below TMS to access the TMS
feature screen.
or to Inbox and press the Menu Select button below Sel .
MN003441A01-AP
Chapter 7 : Advanced Features
81