4
General Radio Operation
Programmable Features
The programmable controls on your radio can be programmed by a
qualified technician to operate certain software-activated features.
The features that can be assigned to these controls, and the page
numbers where these features can be found, are listed below.
As an additional guide, please use the empty spaces provided in your
Quick Reference Card to indicate the features that are programmed
to the various controls for your radio. Additionally, in this manual, all
reference to a programmed control is made with reference to the
actual feature (for example, the Volume Set button).
Any references in this manual to controls that are
“preprogrammed” means that a qualified radio technician must
use the radio’s programming software to assign a feature to a
control.
Table 1: Programmable Features
Feature Page Feature Page
Call Response 35 Phone 33
Channel Selection 18 PL Defeat 25
Conventional Squelch
Options
25 Repeater/Direct 36
Dynamic Priority 32 Scan On/Off 30
Emergency 27 Site Lock/Unlock 38
Light 5 Site Search 39
Monitor 22 Volume Set 21
Nuisance Delete 31 Zone Selection 18
To Next Page
Loading...
