25
Using Your Headset
To toggle between Modes 1 and 2:
Step Result
1
With the headset’s boom closed,
hold the Multifunction Button E
for two seconds.
The headset indicator light turns on.
2
With the boom still closed, press
either volume button
The indicator flashes once for Mode 1,
twice for Mode 2.
3
Open the boom and verify the
LED flash.
The indicator flashes once for Mode 1,
twice for Mode 2.
4
Pair with a device as described in
“Paired Link” on page 15.
Using.fm Page 25 Monday, January 14, 2002 1:43 PM
To Next Page
Loading...
