Motorola C115 - Repetitive Motion Injuries; Dual Band

Photo 1Use your thumb & forefinger to take edge of
PCB. Don’t touch the chips of PCB.
Photo 2Use antistatic fan to blow PCB. Stick
metaldome on PCB under magnifying glass.
Photo 3Put M/B on hat bar fixture smoothly and
brush flux on pad.(photo:3).
Photo 4Then put LCM on PCB. Don’t let LCM stand up
like photo 4.
Photo 5Assembly LCM Holder on M/B. First
assembly circle part then assembly side hook.
(photo:5)