26
SELECTING A CHANNEL
SELECTING A CHANNEL
Press the or button until the Radio
Channel? menu is shown. Press the ENTER
button to begin the next step.
Press the or arrow buttons to select a
new channel. The line “New” will display the
new channel selection.
Press-and-Hold the or button for faster
increments.
Press ENTER to select the new channel, or
to exit without any changes.
Radio Channel?
Old: 1
New: 1
The radio channel is used for all RF broadcasts by the CB300-D. The CB300-D and the radio
receiver frequencies must match or the broadcast will not be received. The channel selection
numbers correspond to the channel selection of 900 MHz digital radios by Motorola.
NOTE: The DLR modem must detect a DLR receiver or the unit will not transmit.
“Old” refers to the current selected channel.
In this example, the number “1” refers to
Channel 1 of the 900 MHz digital radio.
After pressing ENTER, the new channel is
selected.
Old: 1
**Chan Updated
To Next Page
Loading...
