33
SETTING PROFILE ID
Press the or button until the Set Profile
ID? menu is shown. Press the ENTER button
to begin the next step.
The Profile ID is changed one digit at a time
(starting with digit ONE). Use the or
arrow button to change the digit, and press
ENTER to save the value and select the next
digit. Press to exit without any changes.
Set Prole ID?
DIG: *
New: 0002
The profile ID is typically set to create a private communications channel between the DLR
modem and the receiving radio. The default profile ID is set = 0000, and can be changed to any
number from 0000-9999. Both the DLR modem and the receiving radio must have identical profile
ID’s and set for the same channel to receive the radio broadcast.
EXAMPLE: Write a new Profile ID = 3692
NOTE: An asterisk “*” will appear above
the digit enabled for modification.
SETTING PROFILE ID
To Next Page
Loading...
