91
English
UTILITIES
SETTING THE POWER LEVEL B
Each channel in your radio has a predefined
transmit power level that can be changed.
• High power (S) allows you to reach a radio
that is farther away.
• Low power (R) conserves the battery’s
charge.
Note:
• Be aware that a message received
from a nearby radio might change
your radio’s power level to low. This
may cause radios that are farther
away not to receive your transmis-
sions.
• In PassPort mode, the power level is
predefined radio wide.
To set the power level:
Press the preprogrammed Power Level button
(see page 25) to toggle between low and high,
–or–
Do the following:
1 ) to enter menu mode.
2
y or z until
3 ) to select
4
y or z until
5 ) to select
The display shows the current power level.
6
y or z until
or until
7 ) to confirm the selection.
Utilities
Utilities
Power Level
Power Level
Power High?
Power Low?
To Next Page
Loading...
