4.10 View Camera
If you have more than one camera paired with the Parent Unit,
to select the transmission image from a specific camera,
proceed as follows:
1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until is
highlighted, the camera list appear on the screen.
3. Press the + UP button or - DOWN button to select the
desired camera.
4. Press the O button to view the picture from that camera.
Note: Only camera locations with a can be selected.
TIP
Quick Method to View Cameras instead of entering into the menu
bar. Directly press the O button repeatedly to select the
available Camera options from .
NOTE
You are not allowed to delete the camera if there is only one
registered camera in the system.
4.11 Delete Camera
If you wish to delete the connection to a camera, proceed as
follows:
1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until is
highlighted, the camera list appear on the screen.
3. Press the + UP button or - DOWN button to select the
camera that you wish to delete.
4. Confirm with O button.
5. Press - DOWN button to select , and then O to confirm
delete.
18 Parent Unit Menu Options
To Next Page
Loading...
