Motorola CPEi 300 - Step 1 - Change Password

13
Setup Wizard and Authentication
Setup Wizard and
Authentication
Step 1 - Change Password
Once you have launched the setup wizard, you will be prompted to
change your password. Motorola recommends using a password to
protect your home network and CPE device. Passwords are
case-sensitive.
To change your password:
• Ensure the “Enable Login Password Protection” box is
checked.
• Enter a New Login Password in the box. Passwords can be
no more than 20 characters in length.
• Re-type your new password in the Confirm New Login
Password box.
• Click Next.
Note:
If you forget your password, you can reset it back to the
default (motorola) by pressing and holding the reset button on the
back of your CPE for more than 5 seconds. Before resetting the
CPE, ensure the power LED is ON.