Motorola CPEi 300 - Step 2 - Device Time; Step 3 - WiMAX Security

14
Setup Wizard and Authentication
Step 2 - Device Time
This screen allows you to set the time zone and to enable Daylight
Savings Time (when applicable) for your location.
• Select the appropriate time zone for your location from the
drop down box.
• Check the box called “Auto Adjust for Daylight Savings
Time” if you live in a region that observes Daylight Savings
Time (this box is checked by default).
• Click the Next button.
Step 3 - WiMAX Security
The WiMAX Security tab will contain your authentication method.
Check with your service provider to determine if they require a user
name and password for authentication purposes.
• If the Authentication Method is EAP-TLS, no User Name
and Password are required. Enter the Realm information
supplied by your service provider. Click the
Next button.
• If the Authentication Method is EAP-TTLS/MS-CHAPv2,
you will have to enter a User Name and Password and
Realm information supplied by your Service Provider. Once
you have entered the User Name/Password/Realm
information, click the
Next button.
• If you are unsure of the Authentication Method, select
EAP-TLS (this is the default) and click the
Next button.