Motorola CT202 - 7. Area Code Setup; Storing Local Area Code

17Area code
7. Area code
You can set your local area code into the phone. When a number from that area code calls
only the local number will be displayed and stored. If you then redial the number from the
calls list while Auto IP is switched on, the Auto IP number will not be dialled.
7.1 Store the area code
1. Press and hold
m
for 3 seconds, the display shows SEt 1 dAtE .
2. Scroll
c or d to SEt 2 CodE .
3. Press
m
, the display shows CodE - - - - - .
4. The rst
- is flashing, press c or d to scroll to the correct digit.
5. Press
m
to conrm.
6. Repeat this procedure until the full code is entered.
7. Press
f to exit.