Motorola CT202 - 8. PABX Access Code Setup; Storing PABX Access Code

18 PABX access code
8. PABX access code
If the CT202 is connected to a switchboard, you may need to enter a one-digit access
code in the dialling sequence to be able to connect to the outside line.
The access code will be displayed at the beginning of a number on the screen.
8.1 Store the PABX access code
1. Press and hold
m
for 3 seconds, the display shows SEt 1 dAtE .
2. Scroll
c or d to SEt 3 PCOdE .
3. Press
m
, the display shows PCOdE - .
4. The rst
- is flashing, press c or d to scroll to the correct digit from 0 - 9 .
5. Press
m
to conrm and f to exit.