Motorola CT202 - 9. Auto IP Configuration; Storing IP Code for Calls

19Auto IP
9. Auto IP
Allows you to store your IP code in the phone for lower cost call charges for a long distance
call.
9.1 Store a number
1. Press and hold
m
for 3 seconds, the display shows SEt 1 dAtE .
2. Scroll
c or d to SEt 4 AUtO IP .
3. Press
m
, the display shows AUtO IP and the current setting.
4. If necessary scroll
c or d to O n .
5. Press
m
to conrm, the display shows I n PUt COdE .
6. Using the keypad enter the IP code, e.g 17909.
7. Press
m
to conrm and f to exit.
NOTE
After turning Auto IP on and setting the auto IP number, if a number is pre dialed and the
rst digit is 0 then the phone will dial out the number and automatically add the Auto IP
details.