22 Recall and Dial mode
12. Recall and Dial mode
Recall is useful to access certain network services and PABX/switchboard services.
The recall mode preset in the CT202 is suitable for your country network.
Your phone is set to tone dialling. You should only need to change this if connected to an
older type of switchboard / PABX which requires pulse dialling.
12.1 Change your dial mode
1. Press and hold
a
for 3 seconds.
2. The new dial mode setting will be displayed on the screen.
3. Press
l
to return to standby.
To Next Page
Loading...
