Motorola CT202 - 13. Alarm Function Setup; Setting and Configuring the Alarm

23Set the alarm
13. Set the alarm
1. Press and hold
m
for 3 seconds, the display shows SEt 1 dAtE .
2. Scroll
c or d to SEt 5 ALErt .
3. Press
m
and the display shows 00-00 OFF .
4. Scroll
c or d to set the rst digit and
m
to conrm.
5. Repeat this procedure until all digits are correct.
6. Scroll
c or d to O n .
7. Press
f to exit.
NOTE
To stop the alarm press any key or lift the handset. The alarm will stop automatically after
60 seconds if no button is pressed. If at the alarm time the phone is ringing, the handset
is lifted or the phone is in use the alarm will be cancelled. When the alarm is ringing the
telephone line will be engaged.