Motorola CT202I - Auto IP Call Feature; 9.1 Store a number

18 Auto IP
9. Auto IP
Allows you to store your IP code in the phone for lower cost call charges for a long distance
call.
9.1 Store a number
1. Press and hold for 3 seconds, the display shows SEt 1 dAtE .
2. Scroll
or to SEt 4 IP .
3. Press
, the display shows AUtO IP OFF .
4. Scroll
or to O n .
5. Press
to conrm, the display shows I n PUt COdE .
6. Using the keypad enter the IP code, e.g 17909.
7. Press
to conrm.
NOTE
After turning Auto IP on and setting the auto IP number, if a number is pre dialed and the
rst digit is 0 then the phone will dial out the number and automatically add the Auto IP
details.