Motorola CT202I - Getting Started with Your Motorola Phone; Connecting Handset and Base Unit

6 Getting started
1. Getting started
IMPORTANT
Do not place your CT202I in the bathroom or other humid areas.
Location
You need to place your CT202I base within 2 metres of the telephone wall socket so that
the cable will reach. The socket-outlet shall be installed near the equipment and shall be
easily accessible.
Connecting the handset and base
1. Plug one end of the handset curly cord into the socket on the side of the base and the
other end into the socket at the bottom of the handset.
2. Plug the line cord into the socket marked
on the back of the base unit.