1 INTRODUCTION
3
Rear Panel
1 Cable In — Connects to cable signal from your service provider
2 RF Out — Ch 3/4 modulated audio/video (SDTV) to TV or VCR
3 IEEE-1394 — Audio and video device connection
4 Video outputs / YPbPr — Component video output (HDTV)
5 Audio Out — L/R audio (SDTV)
6 Audio Out — Variable L/R audio (SDTV)
7 Digital Audio (Coaxial S/PDIF) — Provides Dolby
®
Digital or PCM output
Digital Audio (Optical S/PDIF) — Provides Dolby
®
Digital or PCM output
8 Video Out — Composite Video (SDTV)
9 S-Video — Connects to S-Video (SDTV) input of TV or VCR
10 M-Card — Inserted M-Card
11 HDMI — High-Definition TV (HDTV) connector
12 eSATA* — External Serial ATA disk interface
13 USB* 2.0 — High-Speed peripheral device connection
14 External IR Input — Connects to a remote control set-top accessory cable
Data test connector (service personnel only)
15 Ethernet* — Network connection
16 Power connector
* Availability of certain features is dependent upon application support.