Motorola DCX3400 - Connecting an SDTV

4 CONNECTING YOUR DCX SET-TOP
20
Connecting an SDTV
1. Connect the stereo audio cable to the AUDIO L/R connectors on the DCX set-top and
the AUDIO L/R connectors on the Standard-Definition TV (SDTV).
2. Connect an S-Video cable to the S-VIDEO OUT connector on the DCX set-top and
the INPUT S-VIDEO on the TV.
Note: If the TV does not support S-Video connections, composite video connections may
be used in place of S-Video connection.
Note: If the TV does not support S-Video or composite video connections, use the RF
out connector on the DCX set-top. The RF connection carries video and audio.
These video connection methods do not support HD video. If you have an HDTV, see
Connecting HDTV — Single Connection for Video/Audio.