Motorola DCX700 - Connecting an A;V Receiver, SDTV, and VCR;DVD Recorder

Connecting Your Set-Top
B
DCX700 High-Definition Digital Set-Top Box • User Guide 15
365-095-14284 x.1
Connecting an A/V Receiver, SDTV, and VCR/DVD Recorder
1. Connect a stereo audio cable to the AUDIO OUT L/R connectors on the DCX set-top
and the INPUT L/R connectors on the A/V receiver.
2. Connect a composite video cable to the
VIDEO OUT connector on the DCX set-top
and the
VIDEO connector on the A/V receiver.
3. Connect a stereo audio cable to the VCR/DVD RECORDER AUDIO OUT L/R
connectors on the A/V receiver and the INPUT AUDIO L/R connectors on the
VCR/DVD recorder.
4. Connect a stereo audio cable to the AUDIO OUT L/R connectors on the VCR/DVD
recorder and the VCR AUDIO IN L/R connectors on the A/V receiver.
5. Connect a composite video cable to the INPUT VIDEO connector on the VCR/DVD
recorder and the composite VIDEO VCR OUT CONNECTOR on the A/V receiver.
6. Connect a composite video cable to the COMPOSITE VIDEO OUT connector on the
VCR/DVD recorder and the VIDEO VCR IN connector on the A/V receiver.
7. Connect a S-Video cable to the S-VIDEO connector IN on the Standard-Definition TV
(SDTV) and the
TV/MONITOR S-Video OUT connector on the A/V receiver.
Note: If your TV or A/V receiver does not support S-Video connections. Composite video
connections may be used in place of S-Video connection.
Note: The digital optical audio (optical S/PDIF) output may be used in place of the stereo
audio outputs (audio L/R). These outputs offer a higher level of audio quality, including
support for Dolby Digital audio.
These video connection methods do not support HD video. If you have an HDTV, see
Connecting HDTV — Single Connection for Video/Audio.