If... Then...
• Always press the PTT button
firmly, until transmission com-
pletes.
• Ensure not to release the PTT
button while transmitting, and not
to immediately press the PTT
button again.
• Ensure the channel is available,
and there is a user reachable
within the transmission range.
If there is a lim-
ited talk range,
perform the following actions:
• Check for clear line of sight to
improve transmission. Avoid be-
ing near steel and/or concrete
structures, heavy foliage, build-
ings, or vehicles.
• Change the placement of the ra-
dio. Ensure your radio is not too
close to your body, such as in a
pocket or on a belt.
If... Then...
NOTICE:
Radios provide greater
coverage in industrial and
commercial buildings.
If the radio echo
feedback,
perform one of the following actions:
• Lower the volume in your radio,
and ensure that transmitting and
receiving radios are not too
close.
• Use earpiece.
If your voice is
not transmitted
or received,
perform the following actions:
• Ensure that the PTT button is
completely pressed when trans-
mitting.
• Ensure that the radios have the
same settings, and the same
PROFILE ID.
• Before talking, wait until you
hear the Talk Permit Tone.
Speaking before hearing the
English
84
To Next Page
Loading...
