Motorola DS3508 - Inverse 1 D

11 - 60 DS3508 Product Reference Guide
Inverse 1D
Parameter # F1h 4Ah
This parameter sets the 1D inverse decoder setting. Options are:
• Regular Only - the digital scanner decodes regular 1D bar codes only.
• Inverse Only - the digital scanner decodes inverse 1D bar codes only.
• Inverse Autodetect - the digital scanner decodes both regular and inverse 1D bar codes.
*Regular
(00h)
Inverse Only
(01h)
**Inverse Autodetect
(02h)
NOTE *For the SR configuration, the Inverse 1D setting default is Regular.
**For the DP configuration, the Inverse 1D setting default is Inverse Autodetect.