Motorola DS3508 - Data Matrix Inverse

Symbologies 11 - 77
Data Matrix Inverse
Parameter # F1h 4Ch
This parameter sets the Data Matrix inverse decoder setting. Options are:
• Regular Only - the digital scanner decodes regular Data Matrix bar codes only.
• Inverse Only - the digital scanner decodes inverse Data Matrix bar codes only.
• Inverse Autodetect - the digital scanner decodes both regular and inverse Data Matrix bar codes.
*Regular
(00h)
Inverse Only
(01h)
**Inverse Autodetect
(02h)
NOTE *For the SR configuration, the default is Regular. **If DPM Scanning is enabled, the scanner behaves as
if the Data Matrix Inverse Autodetect setting is selected. When you disable DPM Scanning, the previous
(user-selected) Data Matrix Inverse setting remains in effect.