Motorola DS3508 - Scanning

Scanning 2 - 5
Scanning
The DS3508 has a built-in, light-weight stand to easily accommodate both hands-free (presentation) and hand-held
scanning.
Presentation Mode (DS3508-SR/HD/DP)
The optional Intellistand adds greater flexibility to scanning operation. When you place the digital scanner in the
stand’s “cup,” the scanner’s built-in sensor places the scanner in presentation (hands-free) mode. When you
remove the digital scanner from the stand it operates in its normal hand-held mode.
Figure 2-2 Scanning in Hands-Free Mode
To operate the digital scanner in the Intellistand:
1. Connect the digital scanner to the host (see the appropriate host chapter for information on host connections).
2. Insert the digital scanner in the Intellistand by placing the front of the digital scanner into the stand’s “cup” (see
Figure 2-2).
3. Use the Intellistand’s adjustment knobs to adjust the height and angle of the digital scanner.
4. Center the symbol in the aiming pattern.
NOTE Certain areas of the digital scanner’s handle may feel warm at times. This is normal.
NOTE Hands-free (presentation) scanning does not apply to the DS3508-ER configuration.
Scanner “Cup”
Adjust height of
IntelliStand
Adjust angle of
scanner “cup”