Maintenance & Technical Specifications 3 - 5
Technical Specifications
Table 3-2
Technical Specifications
Item Description
Physical Characteristics
Dimensions 7.34 in. H x 4.82 in. W x 2.93 in. D
(18.65 cm H x 12.25 cm W x 7.43 cm D)
Weight (without cable) 12.8 oz. (363 gm)
Voltage and Current DS3508-SR/HD/DP: 5 volts ±10%, 330mA
DS3508-ER: 5 volts ±10%, 1.2A
Performance Characteristics
Light Source Aiming pattern: 650nm visible laser diode
Illumination: 630nm LED
Imager Field of View Standard Range Focus: 39.6 H x 25.7 V
High Density Focus: 38.4 H x 24.9 V
Roll/Pitch/Yaw DS3508-SR/HD/DP: ±360, ±65, ±60
DS3508-ER: ±360, ±60, ±65
Motion Tolerance DS3508-SR/HD/DP: up to 100 in/sec (2.54 m/sec) in presentation mode
(horizontal read rate)
DS3508-ER: up to 60 in/sec (1.52 m/sec) for 100% 13 mil UPC;
motion tolerance varies depending on code type, scan distance and print quality
Symbology Decode Capability
1D UPC/EAN (UPCA/UPCE/UPCE1/EAN-8/EAN-13/ JAN-8/JAN-13 plus
supplementals, ISBN (Bookland), ISSN, Coupon Code), Code 39 (Standard, Full
ASCII, Trioptic), Code 128 (Standard, Full ASCII, UCC/EAN-128, ISBT-128
Concatenated), Code 93, Codabar/NW7,Code 11 (Standard, Matrix 2 of 5), MSI
Plessey, I 2 of 5 (Interleaved 2 of 5 / ITF, Discrete 2 of 5, IATA, Chinese 2 of 5),
GS1 DataBar (Omnidirectional, Truncated, Stacked, Stacked Omnidirectional,
Limited, Expanded, Expanded Stacked, Inverse), Base 32 (Italian Pharmacode)
PDF417 (and variants) PDF417 (Standard, Macro), MicroPDF417 (Standard, Macro), Composite Codes
(CC-A, CC-B, CC-C)
2D TLC-39, Aztec (Standard, Inverse), MaxiCode, DataMatrix/ECC 200 (Standard,
Inverse), QR Code (Standard, Inverse, Micro)
Postal U.S. Postnet and Planet, U.K. Post, Japan Post, Australian Post, Netherlands KIX
Code, Royal Mail 4 State Customer, UPU FICS 4 State Postal, USPS 4CB
DPM Marks (DPM unit only) Datamatrix marks applied by dot-peening. All supported barcode types listed
above marked by laser etching, chemical etching, ink marking, molding, stamping
or casting methods on surfaces such as including metal, plastic, rubber or glass
To Next Page
Loading...
