USB Interface 7 - 5
USB Host Parameters
USB Device Type
Select the desired USB device type.
NOTE When changing USB Device Types, the cradle automatically restarts. The digital scanner issues a
disconnect-reconnect beep sequence.
NOTE Select IBM Hand-Held USB to disable data transmission when an IBM register issues a Scan Disable
command. Aim, illumination, and decoding is still permitted. Select IBM OPOS (IBM Hand-Held USB with
Full Scan Disable) to completely shut off the scanner when an IBM register issues a Scan Disable
command, including aim, illumination, decoding and data transmission.
NOTE The SSI over USB CDC option enables a subset of the SSI protocol over the USB CDC interface which
omits all hardware handshaking functionality. For more information refer to the SSI Programmer's Guide.
*USB Keyboard (HID)
IBM Table-Top USB
IBM Hand-Held USB
IBM OPOS
(IBM Hand-Held USB with Full Scan Disable)
To Next Page
Loading...
