10 - 6 DS6878 Product Reference Guide
Optional IBM Parameters
If you configure the digital scanner and find the settings were not saved, or changed, when the system is
restarted scan the bar codes that follow to override IBM interface defaults.
Scan a bar code below after setting defaults and before configuring the digital scanner.
Ignore Beep
The host can send a beep request to the digital scanner. When this parameter is enabled, the request is not
sent to the attached digital scanner. All directives are still acknowledged to the IBM RS485 host as if it were
processed.
Ignore Bar Code Configuration
The host has the ability to enable/disable code types. When this parameter is enabled, the request is not sent
to the attached digital scanner. All directives are still acknowledged to the IBM RS485 host as if it were
processed.
*Disable
Enable
*Disable
Enable
To Next Page
Loading...
