Motorola DS6878 - Page 429

Standard Default Parameters A - 3
Time Delay to Presentation Idle Mode 663 1 Minute 5-23
Time Delay to Presentation Sleep Mode 662 1 Hour 5-26
Timeout to Low Power Mode from Auto Aim 729 15 Sec 5-27
Picklist Mode 402 Disabled Always 5-28
Mobile Phone/Display Mode 716 Disable 5-29
FIPS Security 736 Enabled 5-30
PDF Prioritization 719 Disable 5-31
PDF Prioritization Timeout 720 200 ms 5-31
Continuous Bar Code Read 649 Disable 5-32
Unique Bar Code Reporting 723 Disable 5-32
Decode Session Timeout 136 9.9 Sec 5-33
Timeout Between Decodes, Same Symbol 137 0.5 Sec 5-33
Timeout Between Decodes, Different Symbols 144 0.2 Sec 5-33
Fuzzy 1D Processing 514 Enable 5-34
Hand-Held Decode Aiming Pattern 306 Enable 5-34
Hands-Free Decode Aiming Pattern 590 Enable 5-35
Presentation Mode Field of View 609 Full 5-36
Decoding Illumination 298 Enable 5-37
Multicode Mode 677 Disable 5-37
Multicode Expression 661 1 5-38
Multicode Mode Concatenation 717 Disable 5-43
Multicode Concatenation Symbology 722 Concatenate as PDF417 5-44
Miscellaneous Options
Transmit Code ID Character 45 None 5-47
Prefix Value 99,105 7013 <CR><LF> 5-48
Suffix 1 Value
Suffix 2 Value
98, 104
100, 106
7013 <CR><LF> 5-48
Scan Data Transmission Format 235 Data as is 5-49
FN1 Substitution Values 103, 109 Set 5-50
Transmit “No Read” Message 94 Disable 5-51
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.