Direct Access
1. Press Ï, ° to toggle between
Ring Only and Vibrate Only modes.
Menu Access
1. Press Ï, Å.
2. Press £ and scroll to the Tone
Control sub-menu. The display will
show:
3. Press Ø. The display will show:
4. Press Ø to select. The currently
active Ring or VibraCall™ setting
will be displayed.
5. Press • or £ to scroll through
the other settings. Ringer or
Vibrator selection settings are:
The phone alerts you of an
incoming call using VibraCall™, the
vibration alert, for three cycles and
then flashing Call in the display.
Vibrate
Only
Ring Or
Vib Sel
Tone
Control
Ringer or Vibrator Selection
74
Advanced
Information
¯
Tone Control
To Next Page
Loading...
