Getting Started 1 - 13
1. Touch > Settings > Display > Brightness. The Brightness dialog box displays.
Figure 1-12
Brightness Dialog Box
2. Check the Automatic brightness checkbox to set the ET1 to automatically adjust the brightness using the
built-in light sensor.
Uncheck the checkbox to set the brightness manually. Use the slider to set a brightness level.
3. Touch OK > .
Screen Rotation
To set the screen rotation:
1. Touch > Settings > Display. The Display settings screen appears.
2. Check Auto-rotate screen to set the ET1 to automatically switch orientation when the ET1 is rotated.
Rotate the ET1 90 degrees to the left or to the right.
3. Touch .
•
Animation - Opens a dialog box to set animation transition effects. Options: No animations, Some
animations or All animations.
Screen Timeout
To set the screen timeout:
1. Touch > Settings > Display > Screen timeout. The Screen timeout menu appears.
2. Select one of the timeout values. Options: 15 seconds, 30 seconds, 1 minute, 2 minutes, 10 minutes,
or 30 minutes,
3. Touch .
Sound Settings
Use Sound settings to configure media and alarm volumes. Touch > Settings > Sound.
General Sound Settings
Silent Mode - Check to silence all sounds except the audio from music, videos and alarms. Note: to silence
media and alarms, go to the settings for the specific application.
To Next Page
Loading...
